Using the Video Switcher (Located Under the Table), always select the destination first, then the source

Projecting from the Mac

Power on the Mac, TV1, TV2, and the Projector using the remote control.

1. To project to the Projector: Press Proj, then Press Mac
2. To project to TV1: Press TV1, then press Mac
3. To project to TV2: Press TV2, then press Mac

 Projecting from the PC

Power on the Mac, TV1, TV2, and the Projector using the remote control.

1. To project to the Projector: Press Proj, then Press PC
2. To project to TV1: Press TV1, then press PC
3. To project to TV2: Press TV2, then press PC

Projecting from a Laptop 

Connect your device to the USB-C cable labeled Prsnl, then power on TV1, TV2, and the Projector using the remote control.

1. To project to the Projector: Press Proj, then Press Prsnl
2. To project to TV1: Press TV1, then press PC
3. To project to TV2: Press TV2, then press PC

Trouble Shooting

1. Ensure that the input on TV1 & TV2 is set to HDMI
2. Ensure that the input on the Projector is set to HDMI 1
3. Contact a Lab tech to ensure that cables are connected correctly to the video switcher.
4.